The Future of 3D Printing is Simple

"This really is the next generation of washing and curing.

It makes a normally messy process delightfully simple.

Just shove in the print, press start, and forget about it."

@VogMan

"I didn't think it was going to be able to clean everything, dry it properly and cure it. Especially putting them in there with supports.

But my prints came out pretty much perfect.

I'm definitely going to be using this a lot more..."

@GomeowCreations

Really simple and elegant solution.

Works nicely for me at home, because I don't have to worry about liquid going anywhere."

International Digital Dental Academy - Adam Nulty

"It's a pretty cool tool!

It definitely beats swirling your parts around in a mason jar, and then sticking them in the sun."

@Ian Davis

The next generation of post-processing

EIBOS Oceanus 3-in-1 | Automatic Resin Post-Processing | Wash, Dry & Cure - Yes, That's 3D Printed

The future of 3D printing is simple

The EIBOS Oceanus is the first completely automatic wash & cure station for resin 3D printers.

Just drop in the print, press the button, and come back when it's finished.

β€Ž

The Oceanus has been likened to a washing machine for your resin printer, and we couldn't be happier with the comparison.

We wouldn't want to go back to washing clothes by hand either.

Improved in every way

The Oceanus doesn't just put three functions into one machine. It improves upon each of them individually.

EIBOS Oceanus 3-in-1 | Automatic Resin Post-Processing | Wash, Dry & Cure - Yes, That's 3D Printed

3-IN-1 or 2-IN-1 or 1-IN-1

The EIBOS Automatic can be set to go through the full post-processing cycle, or each function can be used individually.

This allows you to remove supports before curing when necessary.

  • Extra-strong wash

    A high torque motor gives the Oceanus extra cleaning power compared to the magnet stirrers of traditional wash & cures.

  • Extra-strong dry

    The 7000 RPM fan is able to dry your prints in holes and crevices that hand drying isn't able to reach.

  • Extra-strong cure

    96 evenly placed UV lamps give a more uniform light coverage than traditional wash & cure stations.

Your time is worth more

The Oceanus doesn't make post-processing faster. It just takes you out of the equation.

EIBOS Oceanus 3-in-1 | Automatic Resin Post-Processing | Wash, Dry & Cure - Yes, That's 3D Printed

1-minute operation

Set it, forget it.

Come back 30 minutes later to a finished print.

EIBOS Oceanus 3-in-1 | Automatic Resin Post-Processing | Wash, Dry & Cure - Yes, That's 3D Printed

Automatic fill and drain

The Oceanus automatically pumps your cleaning liquid into the chamber, and drains it after the washing cycle.

Smart Liquid Sensors

The Oceanus does not need to be filled to the brim with cleaning liquid.

It detects the amount of liquid in the unit, and washes accordingly.

Settings memory

The Oceanus remembers your last settings, andΒ lets you start again with just one press.

It doesn't get much faster than this.